Legacy EVA Cork
Product description
ZipFit Legacy EVA Cork are ready-to-wear replacement insoles. Made out of an EVA cork composite, these insoles are designed with a patented dynamic heel cup molding system that supports your heel, lower ankle, and arch, giving continuous comfort and protection from the ground up.
Pair ZipFit Insoles with your ZipFit Innerboots to maximize comfort and support, or wear the footbeds daily to reduce stress, fatigue, and injury in every activity, in any shoe.
Size guide
Insole sizing chart
For Legacy insoles, the size printed on the product corresponds to US Men's sizing. Use the size chart below to confirm your size. If you are between sizes, we recommend sizing up and trimming the insole to fit.
| US Men's | US Women's | Mondo | EU |
|---|---|---|---|
| 3 | 4 | 21 | 34 2/3 |
| 4 | 5 | 22 | 36 |
| 5 | 6 | 23 | 37 1/3 |
| 6 | 7 | 24 | 38 2/3 |
| 7 | 8 | 25 | 40 |
| 8 | 9 | 26 | 41 1/3 |
| 9 | 10 | 27 | 42 2/3 |
| 10 | 11 | 28 | 44 |
| 11 | 12 | 28 | 45 1/3 |
| 12 | 13 | 30 | 46 2/3 |
| 13 | 14 | 31 | 48 |
Product Details
The deep heel cup cradles and supports your heel and lower ankle anatomy, cushioning each heel strike.
The patented 3-dimensional dynamic design helps to prevent heel and foot twisting, slipping and blistering in your shoes and boots.
Stabilizing your heel bone and lower ankle joint in a neutral alignment allows your arches and forefoot to adapt and move more naturally.
Legacy Orthotic
Designed by ZipFit Founder, Sven Coomer, this insole was first produced in 1989 under the name SoleMate. Sven was still operating Footloose Sports in Mammoth, CA where he designed the original Superfeet orthotic and the ZipFit innerboot. This insole mold has been used and adored by many over the last 30+ years and is the perfect complement to ZipFit innerboots. Like ZipFits and all of the best footwear, these are made in Italy.
Fit Considerations
Reviews of the Legacy EVA Cork
Drop-in insoles are replacement footbeds that are designed to fit a variety of feet and shoes and offer heightened support and foot alignment. Insoles were made to provide a variety of benefits, including increasing comfort and arch support in daily wear, relieving foot and joint pain, providing support to decrease injury risk, enhancing athletic performance, and more.
Choose the footbed that corresponds to the your shoe size. If between sizes, it’s best to size up and alter them if needed.
You can trim the footbeds to length if you are between sizes. Check out the Trim to Fit Instructions video.
ZipFit Legacy Insoles were designed to fit in all shoes and all sports, including your ZipFit liners. They can be dropped into any shoe for any activity to increase support, comfort, and healthy foot positioning.
In general, your insoles should be broken in after about 10 hours of walking with them. We suggest walking in them for a few hours prior to wearing for a full day of heavy activities. If you’re unfamiliar with wearing footbeds, expect a light pressure at the back of the arch until worn in.
ZipFit Legacy Insoles are made with intention and without planned obsolescence, like ZipFit innerboots. Constructed using an EVA Cork and natural leather top sheet, these respond well to heat, and will adapt to the form of the foot to get better over time. They will last you for as long as a pair of shoes last, if not much longer.
ZipFit Legacy Insoles may provide dramatic improvements and relief in comfort and support. However, our insoles are not a substitute for professional medical examinations, core and corrective orthotics as prescribed by licensed physicians and podiatrists. If ZipFit support is not comfortable we recommend a thorough foot examination by your podiatrist. The sooner you act, the better your chances for relief.